Sunday, April 19, 2009

Kitchen Table Progress

I think I may have mentioned before that finishing a piece of furniture can take as long or longer than the building it. Wood is a natural material and it can be tricky and even unpredictable.
Steve did quite a bit of research as he has never worked with bird's eye maple. He did do one shelving piece in maple and that was trickier to finish than white oak, which is what he usually works with.
Of course he consulted the internet and his favorite publication: Fine Woodworking (that's besides his other fav publication Fine Homebuilding). He even emailed the author of "Three Finishes for Bird's Eye Maple", Teri Masaschi to ask a few questions. And she very kindly emailed back!

Steve has been working on finishing the bird's eye maple table top for a few weeks now.
For anyone who is a newbie at woodworking, you don't just go and slap some stain on wood after you are done sanding. That would not be wise because as I said, the wood can be unpredictable.
Steve always makes some test pieces to determine how the wood takes the dye, stain or shellac, etc... Here you can see the variations he came up with with different layers of dye.
We selected the top center board color as it is lighter than all the oak in our kitchen and we feel it will offer a nice contrast and show off the figuring very well. What do you think?

One thing that came up with this particular project is that some of the "bird's eyes" popped out. They were filled with a fill stick as you can see here.
Steve decided to use a combination of gel and shellac for the finish. A few kinds of shellac that I will post about later as I don't have the details right now. He is in process of applying several coats of shellac and just last night after putting on another coat, he discovered some "ghosting."

No, our table top is not haunted. It just has some white film on a section of it. Not the look we were going for. There are many reasons this could happen. Possibly there is too much humidity in our basement and higher water content in the shellac then caused this. Possibly slight residue of sanding was left and became embedded in a layer of shellac. You see what I mean about tricky

So now, we have the dehumidifier going and Steve is contemplating sanding off some layers and beginning again with the shellac. It's tricky. More to come.

But as you can see here, this wood is so pretty, it's work all the effort. Finishing is really the hardest part to woodworking!

Friday, April 03, 2009

Just saying Hi

I just realized that I went the entire month of March without posting.

True we haven't been doing much, but a month? That's just not acceptable.

Steve has been working on the table top. He just this week started applying the layers of finish. He has been doing extensive research as he has never worked with Maple before.

I have to admit that right now I just don't have the oompf to write up the minutae of dyes and shellac colorations and how those combinations interact etc... etc...

Instead, I'm just posting this pretty picture of daffodils and saying Happy Spring!

Right now, we are in the process of looking for tenants also. Our adorable twenty-something roommates had to split. I believe we will be wrapping that process up this weekend. It is always good to have that behind us. Miss you guys.